Before analysis, match the catalog number and lot on the vial to the live USP Reference Standards Catalog or USP Store. For a current lot, check whether USP assigns a Valid Use Date and follow it if one applies. For a previous lot, use it only while its assigned date is still valid. Follow the lot label and USP Certificate, when available, and record the lot, the status you verified, the check date, and any assigned Valid Use Date in the standard-and-solution record. (USP Reference Standards FAQ, Example USP lot certificate)
In a release or stability sequence, a passing system suitability result and a documented lot check answer different questions. The sequence shows whether the analytical system met its method criteria. The preparation record shows which vial supplied the standard, and the dated USP lookup shows whether that lot was current or still valid when used. A reviewer needs to be able to trace all three to the same sequence.
Check the vial against the live USP listing
Start with the catalog number on the vial and the specific standard named in the compendial procedure. Then match the lot number in the listing, including its letters and digits. A product-name match can take you to the right item while leaving you on a row for a different lot. USP updates the catalog and store daily and puts the responsibility for checking official lot status on the user. (USP Reference Standards FAQ, Example USP lot certificate)
USP’s FAQ says a lot listed as the current lot is valid for use and that current lots generally carry no Valid Use Date; the FAQ names only one item-specific exception. Treat that general rule as a default, not as a substitute for the listing, and look for any date the live listing applies to the exact item and lot in front of you. After the current lot is depleted, it moves to previous-lot status and receives a date. USP describes three to twelve months from depletion as typical. Take the date from the live listing for the exact lot. The range provides context and cannot supply a date for the worksheet. (USP Reference Standards FAQ)
A previous lot is usable under USP’s lot-status policy during its assigned validity period. USP says it cannot support use after that date. If the lot is missing, the applicable date is unclear, or the vial and listing disagree, pause the preparation and resolve the discrepancy through the laboratory’s procedure. A purchase date, an unopened vial, or an old catalog extract cannot settle an unresolved current-status check. (USP Reference Standards FAQ, Example USP lot certificate)
The evidence should be dated close enough to the actual use for the reviewer to reconstruct the decision. For example, if your procedure records the catalog check at preparation, keep the lookup date and the preparation identifier together. For a historical review, a saved listing or dated check associated with that preparation is evidence of what was observed at the time. A listing opened today can answer today’s question. Recover evidence from the original date if the historical status is uncertain.
Read the lot label and certificate before preparation
Open the certificate for the lot actually on the bench. USP provides certificates for most reference standards. These give users the label text and may add instructions or handling information. USP does not issue a certificate of analysis for these materials. The example certificate in Sources identifies the catalog item and lot and directs users to the catalog or store for current status. Use it to see what a USP Certificate looks like. The live listing carries the status for the vial you plan to use. (USP Reference Standards FAQ, Example USP lot certificate)
Read the procedure, label, and available certificate together. One lot may be used as supplied, while another may need drying or a correction based on moisture or loss on drying. For a quantitative application, carry the assigned value and its basis into the preparation calculation. That basis can change with the lot, so a value or correction copied from a previous worksheet can affect the result even when the catalog item is the same. If neither the label nor the certificate carries an assigned value, USP says 100.0% cannot be assumed and that the lot was not developed for quantitative use, so resolve the mismatch with the method before preparing a quantitative standard. If a certificate is unavailable, consult the label and associated procedure and resolve missing instructions before proceeding. (USP Reference Standards FAQ, Example USP lot certificate)
Storage is lot-specific too. USP’s certificate and FAQ both say storage conditions can change from one lot to another and that the storage condition for an unopened standard appears on the container label rather than on the Safety Data Sheet. When a replacement lot arrives, compare its label storage statement with the location and conditions your inventory record assumes instead of carrying the previous lot’s entry forward. USP performs its continued-suitability testing on material stored as labeled, so it has no data for storage at another temperature; handling outside the label conditions becomes an assessment the laboratory documents under its own procedures. (USP Reference Standards FAQ, Example USP lot certificate)
The USP FAQ also explains the compendial boundary by citing General Notices 5.80. When a USP or NF test or assay specifies a USP Reference Standard, conclusive compendial results require the specified standard. The lot check helps establish that the specified material was used. Suitability of the material still depends on its condition. USP leaves previously opened vials and temperature excursions to the user’s assessment under laboratory procedures. Capture any handling decision with the preparation record and verify official lot status separately. (USP Reference Standards FAQ)
A four-field worksheet for the standard-and-solution record
Add these four entries to the existing preparation record or link them from the standard-and-solution table. Use one row per standard preparation so that distinct preparations can be traced even if they share a catalog number. This worksheet is an operational example. Section 211.194(c) sets the U.S. records obligation and leaves laboratories to determine how their records are organized. (21 CFR 211.194)
| Field | What to enter | What the reviewer checks |
|---|---|---|
| Catalog number | USP catalog number from the vial, matched to the standard specified in the method. | The preparation used the intended standard, including the correct item when names are similar. |
| Lot used and USP status | Exact vial lot and the status shown by USP at the check, current or previous. | The lot matches the preparation record and the dated listing evidence. |
| Valid Use Date or current-lot check | For a lot with an assigned date, record that date and when you checked it. For a current lot with no assigned date, record the check date and the absence of an assigned date. | The lookup supports the status on the day of use. The check date and any Valid Use Date are separate entries. |
| Instructions applied | Reference the lot label and available certificate. Record any required preparation step and the assigned value and basis used where relevant. | The recorded steps and calculation use the instructions for the actual lot. |
Link the row to the preparation ID used in the sequence. A worklist label such as “assay standard” gives the reviewer a purpose, but usually needs the preparation identifier to lead back to the vial and its lookup. When several standards feed one run, record which preparation served each purpose, including any separate material used for a suitability check. A generic line for the sequence can hide a switch between preparations with different lot histories.
When a study moves to a new lot
Suppose an ongoing stability study has a preparation made from Lot A and the next time point uses Lot B after USP changes its listing. Keep the original Lot A entry with its check, preparation date, and linked injections. Create a separate entry for Lot B. Check its status and compare the label and certificate for any change in preparation, assigned value, or basis. Link only the preparations and injections that actually used Lot B to the new entry. If an earlier test needs to be reconstructed, the reviewer can still see which lot applied at that time.
If Lot A now appears as a previous lot, check its assigned date before planning a new preparation using that vial. For a later injection from a solution made earlier, review both timelines under the method and the approved laboratory procedure. The vial’s USP Valid Use Date and the laboratory’s supported solution use-by date govern different materials. A valid source lot on preparation day does not settle the later use of a prepared solution. The solution’s stability period gives no authority to make a new preparation from a lot after its assigned date. Document the actual dates and escalate ambiguous cases through the site’s quality process. (USP Reference Standards FAQ, FDA CGMP Records and Reports Q&A, question 5)
For a lot change, ask whether the new label or certificate changes the preparation or calculation and whether the approved method or local change procedure calls for a comparison, qualification, or other documented check. If a check is required, record the rationale, applicable acceptance criteria, and result with the change. Under the U.S. records rule, laboratories verify method suitability under actual conditions of use, and modifications to established methods carry separate record obligations. (21 CFR 211.194)
What U.S. CGMP requires in the laboratory record
Under 21 CFR 211.194(c), U.S. finished-pharmaceutical CGMP requires complete records of any testing and standardization of laboratory reference standards, reagents, and standard solutions. Section 211.194(a) also addresses test data, calculations, who performed the test and when, and second-person review of original records. The analyst can capture the lot check during preparation, and the reviewer can reconcile the actual vial, listing evidence, preparation instructions, and sequence during record review. The USP listing supplies lot status. The regulation governs the laboratory records. (21 CFR 211.194, USP Reference Standards FAQ)
FDA’s nonbinding Records and Reports Q&A gives separate recommendations in question 5 for laboratory chemicals, reagents, and solutions. The agency says to follow the manufacturer’s use-by or expiry date for purchased reagents and solutions when one is provided. It expects an assessment to establish appropriate dating when those purchased materials lack a date. For in-house solutions used in quantitative analysis, FDA calls for formal stability studies to determine expiry. FDA says to document and follow the dates in procedures and to label and discard in-house solutions according to their assigned dating. FDA also says these principles apply at active pharmaceutical ingredient manufacturing and testing sites. (FDA CGMP Records and Reports Q&A, question 5)
Apply the U.S. regulation and FDA’s recommendations in their respective contexts. EU GMP, EU GDP, and WHO practice require their own applicable authorities. For the USP lot decision, use the USP listing and lot instructions. A U.S. records provision, a documented solution stability period, or an internal retest date provides no basis to extend USP’s assigned Valid Use Date. (21 CFR 211.194, FDA CGMP Records and Reports Q&A, question 5, USP Reference Standards FAQ)
Review the lot evidence even when suitability passes
A run can meet its system suitability criteria while the lot record is incomplete. If an old lot was used, a passing chromatogram cannot show whether that lot was still within its Valid Use Date. Start with the sequence and follow its preparation ID to the vial lot and the dated USP lookup. If the chain breaks or the lookup shows that the lot was used past its date, identify the affected preparations and injections for review under the laboratory’s discrepancy procedure. Keep the original record and document the basis of any correction. (21 CFR 211.194, USP Reference Standards FAQ)
Several apparently small shortcuts create the same review problem. A lot hard-coded in a procedure can outlast the lot supply. A default potency field may carry forward an earlier lot’s value or basis. An opened vial can be listed as current even though its handling history calls for review. A catalog check made at receipt can become stale before use. Give the reviewer evidence for each question where it belongs, in the dated lookup, the preparation and calculation record, or the handling assessment. (USP Reference Standards FAQ, Example USP lot certificate, 21 CFR 211.194)
For the separate sequence-level question, see how to interpret a passing HPLC system suitability test. That review concerns the analytical sequence. For inventory and storage records covering material sampled from a production batch, see reference and retention samples. Here, the record to reconstruct is the reference standard used to prepare the analytical solution.
Sources
Internet Archive copy of the official USP FAQ, captured December 8, 2025. Covers current and previous lots, Valid Use Dates, assigned values, storage, and handling. (USP Reference Standards FAQ)
USP Certificate for a specific lot, used here to illustrate certificate content and USP’s instruction to check lot validity before use. (Example USP lot certificate)
U.S. laboratory records regulation. Subsection (c) covers testing and standardization records. Subsection (a) covers test data and review. (21 CFR 211.194)
FDA’s nonbinding recommendations for dating purchased laboratory reagents and solutions and setting expiry for in-house solutions. (FDA CGMP Records and Reports Q&A, question 5)




